lite-on dcc release lite-on technology corp. / optoelectronics no.90,chien 1 road, chung ho, new taipei city 23585, taiwan, r.o.c. tel: 886-2-2222-6181 fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto ir emitter and detectorproduct data sheetlte-s9711-j spec no.: ds50-2013-0038effective date: 01/07/2014revision: b bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4
1 / 7 part no. : l te - s9 7 1 1 - j bns - od - fc 002/a4 ir emitter and detector lt e - s9 7 1 1 - j 1. description lite - on offers a broad range of discrete infrared components for application such as remote control, ir wireless data transmission, security alarm & etc . customers need infrared solutions featuring high power, high speed and wide viewing ang els. the product line includes gaas 940nm ireds, algaas high speed 850nm ireds, pin photodiodes and phototransistors. photodiodes and phototransistors can be provided with a filter that reduces digital light noise in the sens or function, which enables a hi gh signal - to - noise ratio. 1 . 1. features ? meet rohs , green product . ? package in 8 mm tape on 13 " diameter reels. . ? compatible with automatic placement equipment. ? compatible with infrared reflow solder process. ? eia std package. ? peak wavelength p= 94 0nm ? wate r clear plastic with s ide view lens . ? moisture - sensitive level 3 1.2 . applications ? infrared emitter ? pcb mounted infrared sensor 2 . outline dimensions notes : 1. all dimensions are in millimeters (inches). 2. tolerance is 0. 1 mm (.0 04 ") unless otherwise noted. 3. specifications are subject to change without notice.
2 / 7 part no. : l te - s9 7 1 1 - j bns - od - fc 002/a4 ir emitter and detector lt e - s9 7 1 1 - j 3. absolute maximum ratings at ta=25 parameter maximum rating unit power dissipation 100 mw peak forward current (300pps, 10s pulse) 1 a dc forward current 5 0 ma reverse voltage 5 v operating temperature range - 40 c to + 85c storage temperature range - 55 c to + 100 c infrared solder ing condition 260c for 10 seconds max. 4. electrical / optical characteristics at ta=25 parameter symbol min. typ. max. unit test condition radiant intensity i e 3.0 - - mw/sr i f = 20ma peak emission wavelength peak - 940 - nm i f = 20ma spectral line half - width ? - 5 0 - nm i f = 20ma forward voltage v f - 1.2 1.5 v i f = 20ma reverse current i r - - 10 a v r = 5v viewing angle 2 1/2 - 45 - deg note: 1 . 1/2 is the off - axis angle at which the luminous intensity is half the axial luminous i ntensity. 2 . the dominant wavelength, d is derived from the cie chromaticity diagram and represents the single wavelength which defines the color of the device. 3 . reverse voltage (v r ) condition is applied for ir test only. the device is not designed for reverse operation. bin code list radiant intensity unit mw/sr@20ma bin code min max j 3.0 4.5 k 4.0 6.0 l 5.0 -
3 / 7 part no. : l te - s9 7 1 1 - j bns - od - fc 002/a4 ir emitter and detector lt e - s9 7 1 1 - j 5. typical electrical / optical characteristics curves (25 ambient temperature unless otherwise noted) 100 80 60 40 20 0 0 .5 1 .0 1040 940 840 60 50 40 30 20 10 r e la tiv e r a d ia n t in te n s ity w a v e le n g th (n m ) f ig .1 s p e c t r a l d is t r ib u t io n 0 f o rw a rd c u rre n t if (m a ) a m b ie n t t e m p e r a t u r e f ig .2 f o r w a r d c u r r e n t v s . a m b ie n t t e m p e ra tu re t a ( c ) o 100 -4 0 0 -2 0 20 60 40 80 a m b ie n t t e m p e ra tu re t a ( c ) v s . a m b ie n t t e m p e r a t u r e f ig .4 r e l a t iv e r a d ia n t in t e n s it y -2 0 o u tp u t p o w e r r e la tiv e t o v a lu e a t if = 2 0 m a 0 .6 0 .2 0 0 .4 0 .8 1 .0 1 .2 60 40 20 0 o 80 f o rw a rd c u rre n t (m a ) 0 1 .6 f o r w a r d v o l t a g e f ig .3 f o r w a r d c u r r e n t v s . f o rw a rd v o lta g e (v ) 1 .2 0 2 .8 2 .4 2 .0 v a lu e a t if = 2 0 m a o u tp u t p o w e r r e la tiv e t o 1 .0 2 .0 0 3 .0 4 .0 5 .0 40 v s . f o r w a r d c u r r e n t f ig .5 r e l a t iv e r a d ia n t in t e n s it y f o w a rd c u rre n t (m a ) 20 0 80 60 100 r e la tiv e r a d ia n t in te n s ity f ig .6 r a d ia t io n d ia g r a m 0 .6 0 .5 0 .3 0 .1 0 .2 0 .4 0 20 10 o o o 80 o 90 o 70 60 o o 50 40 o o 30 o 0 .9 0 .7 0 .8 1 .0
4 / 7 part no. : l te - s9 7 1 1 - j bns - od - fc 002/a4 ir emitter and detector lt e - s9 7 1 1 - j 6 . suggest soldering pad dimensions 7 . package dimensions of tape and reel note: all dimensions are in millimeters (inches).
5 / 7 part no. : l te - s9 7 1 1 - j bns - od - fc 002/a4 ir emitter and detector lt e - s9 7 1 1 - j note: 1. all dimensions are in millimeters (inches). 2 . empty component pockets sealed with top cover tape. 3. 13 inch reel - 90 00 pieces per reel. 4 . the maximum number of consecutive missing lamps is two. 5 . in accordance with ansi/eia 481 - 1 - a - 1994 specifications. 8 . cautions 8 . 1. application the leds described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).consult liteons sales in advance for information on application s in which exceptional reliability is required, particularly when the failure or malfunction of the leds may directly jeopardize life or health (suc h as in aviation, transportation, traffic control equipment, medical and life support systems and safety dev ices). 8 . 2. storage the package is sealed: the leds should be stored at 30c or less and 90%rh or less. and the leds are limited to use within one year, while the leds is packed in moisture - proof package with the desiccants inside. the package is op ened: the storage ambient for the leds should not exceed 30c temperature or 6 0% relative humidity. it is recommended that leds out of their original packaging are ir - reflowed within one week hrs . for extended storage out of their original packaging, it is recommended that the leds be stored in a sealed container with appropriate desiccant, or in a desiccators with nitrogen ambient. leds stored out of their original packaging for more than one week hrs should be baked at about 60 deg c for at least 2 0 ho urs before solder assembly. 8 . 3. cleaning use alcohol - based cleaning solvents such as isopropyl alcohol to clean the leds if necessary.
6 / 7 part no. : l te - s9 7 1 1 - j bns - od - fc 002/a4 ir emitter and detector lt e - s9 7 1 1 - j 8 . 4 . soldering r ecommended soldering conditions : reflow soldering s oldering iron pre - heat pre - heat time peak tempe rature soldering time 150~20 0c 120 seconds max. 260 c max. 10 seconds max.(max. two times) temperature soldering time 3 00c max. 3 seconds max. (one time one) because different board designs use different number and types of devices, solder pa stes, reflow ovens, and circuit boards, no single temperature profile works for all possible combinations. however, you can successfully mount your packages to the pcb by following the proper guidelines and pcb - specific characterization . lite - on runs bo th component - level verification using in - house kyramx98 reflow chambers and board - level assembly. the results of this testing are verified through post - reflow reliability testing. profiles used at lite - on are based on jedec standards to ensure that all pac kages can be successfully and reliably surface mounted. figure on page3 shows a sample temperature profile compliant to jedec standards. you can use this example as a generic target to set up your reflow process. you should adhere to the jedec profile limits as well as specifications and recommendations from the solder paste manufacturer to avoid damaging the device and create a reliable solder joint. 8 . 5 . drive method an led is a current - operated device. in order to ensure intensity uniformity on mul tiple leds connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each led as shown in circuit a below. circuit model ( a ) circuit model ( b ) (a) recommended circuit (b) the brightness of each led might appear different due to the differences in the i - v characteristics of those leds. led led
7 / 7 part no. : l te - s9 7 1 1 - j bns - od - fc 002/a4 ir emitter and detector lt e - s9 7 1 1 - j 9 . reliability test classif ication test item test condition reference standard endurance test operation life ta= under room temperature as per data sheet maximum rating test time= 1000hrs mil - std - 750d:1026 (1995) mil - std - 883g:1005 (2006) high temperature high humidity storage (thb) ta= 85 c rh= 85 % test time= 50 0hrs mil - std - 202g:103b (2002) jeita ed - 4701:100 103 (2001) high temperature storage ta= 10 0 5 c test time= 5 00hrs mil - std - 750d:1031 (1995) mil - std - 883g:1008 (2006) jeita ed - 4701:200 201 (2001 ) low temperature storage ta= - 555 c test time= 5 00hrs jeita ed - 4701:200 202 (2001) environmental test temperature cycling - 55 c 25 c 105 c 25 c , 30 mins 5mins 30mins 5mins test time: 2 0 cycles mil - std - 750d:1051 (1995) mil - std - 883g:1010 (2006) jeita ed - 4701:100 105 (2001) jesd22 - a104c (2005) thermal shock 100 5 c - 30 c 5 c 15mins 15mins test time: 2 0 cycles mil - std - 750d:1056 (1995) mil - std - 883g:1011 (2006) mil - std - 202g:107g (2002) jesd22 - a106b (2004) solder resistance t.sol = 260 5 c dwell time= 101 seconds mil - std - 750d:2031(1995) jeita ed - 4701: 300 302 (2001) solderability t. sol = 2 3 5 5 c dwell time= 2 1 seconds ( R 95 of the dipped surface ) mil - std - 750d:2026 (1995) mil - std - 883g:2003 (2006) mil - std - 202g:208h (2002) ipc/eia j - std - 002 (2004) 1 0 . others the appearance and specifications of the product may be modified for improvement, without prior notice.
|
